We are searching data for your request:
Upon completion, a link will appear to access the found materials.
How to remove paint from wood: tips for using caustic soda, chemical paint remover, sandpaper, sander or hot air gun.
If you have wooden furniture in your house that needs to be restored, we don't necessarily have to contact the restorer. Restoring a piece of furniture it is not very complicated: you just need a little patience and a good dose of manual skills. If you lack experience, do not engage in the restoration of fine furniture but try with old shutters or other wooden accessories moreexpendableto your practice.
When you want to restore accessories, the first thing to do is to remove the paint from the wood. In this regard, below you will find all the useful information on how to remove paint from wood with DIY.
For more information on the restoration of an old piece of furniture, please refer to the articleHow to renew an old piece of furniture.With the restoration of wood you will have to learn to model the stucco to heal any cracks, to smooth the surfaces but above all you will have to learn to exercise your patience, also for thepaint stripping! If the paint is badly damaged and tends to flake off,stripping the woodit will be simple, otherwise you will have to repeat the process over and over again to get good results.
If you have any doubts, it might be a good idea to start with a piece of furniture of little value: in this way you will get some practice. The first restoration operation to be performed on the furniture is the stripping which consists in removing the layers of paint from the wood and recovering the surface to its original state.
How to remove paint from wood with the paint stripper
- 1 gel paint remover
- 1 large metal scourer
- 1 bowl with a brush
- 1 pair of very resistant rubber gloves
- 1 protective mask
- 1 roll of paper tape
- 1 medium size flat brush
How to remove paint from wood, precautions
Before proceeding with the paint stripping, be sure to operate in complete safety. These precautions are valid for both the use of onechemical paint removerboth for the use of caustic soda forstripping the wood.
- Wear gloves and a mask
- Place the furniture in a well-ventilated room, taking several breaks
- Remove all the accessories that make up the furniture and take it apart as much as possible
- Protect any cracks or crevices with paper tape that will then need to be fixed
How to remove paint from wood with the paint stripper, the procedure
- Pour some gel into the container and spread abundantly on the cabinet with a brush, making small parts at a time: the gel tends to evaporate and dry quickly
- Let it act for at least twenty minutes
- Once this is done, use the scourer to remove the gel, making a fair pressure: the scourer must always be used in the direction of the wood grain so as not to mark the furniture
- Go over the gel several times until the old varnish is gone
- Then continue on every part of the cabinet, drawers, feet included
- Remove the tape after stripping and clean the remaining paint residue with the steel wool.
Which paint stripper to choose?
There are many paint strippers on the market, if the paint to be removed is very damaged and the bare wood is visible between the surface cracks, you can choose a milder chemical paint remover. If not, we recommend a more powerful "super paint remover" type product that can also act on lacquered wood.
Paint the wood with caustic soda
Caustic soda is extremely toxic so we do not recommend the do-it-yourself application of this method. Despite the toxicity of caustic soda, its use forstripping the woodit is very popular with operators in the sector who wear gloves, a mask and a protective uniform. Caustic soda is onepaint strippervery aggressive, so wear old work clothes that can get damaged.
Forstripping the wood with caustic soda, dilute 150 grams of product for each liter of hot water you intend to use.
Pour the caustic soda into hot water and mix gradually with a wooden strip.
With an old brush or with a DIY pad made with a wooden strip on which you have wrapped old rags, dab the solution on the furniture to be stripped.
Caustic soda is very corrosive: dab it on the paint and leave it to act until it has removed the color. Use a spatula to remove the aqueous solution slurry containing caustic soda and old paint.
How to remove paint manually
The use of sandpaper and sanders can be recommended for flat surfaces, easy to manage and above all not very large. For themanual stripping of woodwe invite you to follow the guidehow to renew shutters, the guide talks about wooden shutters but the same technique can be applied to any wooden surface.
Who intends to use asander for stripping woodwill have to be very careful.
Therestripping of woodit can be performed by heating (with hot air gun), by dissolving (caustic soda, chemical paint remover) or by abrasion (sandpaper, grinder, sander, scraper ...). Abrasion is undoubtedly the cheapest method but also the riskiest one because a lightness is enough to ruin our wooden support. To remove the paint from the wood with the sander, you will have to use a belt sander to be passed with extreme delicacy.
For thepaint stripping with hot air gunwe invite you to read the articlestripping the wood.